MetalPack hand sealing machine, type 325

MetalPack hand sealing machine, type 325

Plastic and aluminium trays can be simply and effectively sealed with this machine. With heat-resistant foil you seal the various compartments of each tray. Thanks to the replaceable mould you can seal various types of trays up to a maximum of 1/2 Gastronorm. The heated sealing plate can be kept clean easily thanks to a non-stick surface. Thanks to the special sealing mechanism a strong sealing pressure is obtained with smooth operation. Because of this the machine can be operated quickly and easily.



Needle roll (optional)

By default, every machine is delivered with a smooth pressure roll.
If desired the machine can also be delivered with a pressure roll that is equipped with needles. These see to it that the sealing foil is perforated.


Moulds can only be manufactured after (a) drawing(s) and/or sample trays have been received. The mould should be place on the lower table or the adapter plate. An adapter plate is required if a mould is necessary, for which the tray has at most the menu dimensions (227 mm). The lower side of the mould corresponds with the lower frame or the adapter plate, the upper side with the tray to be sealed. Each mould is equipped with a silicon rope that serves to support it at the right locations and also has an insulating function. For each type of tray a different mould is needed. The moulds can be exchanged easily.

Adapter plate

By means of a special adapter plate various moulds  that are manufactured for the Type 290 can also be used on the Type 325.


Please visit our website for other models or consult your dealer.

Technical specifications

Foil width:
Foil roll diameter:
Foil roll core diameter:
Operating temperature:
Dimensions (bxdxh):
1.7 kW
220/240 Volt – 50/60 Hz
7.2 Ampere
335 mm maximum
Ø 200 mm maximum
Ø 76 mm
100 – 200 °C (adjustable)
Opened: 45x54x55 cm
Closed: 45x60x20 cm
Shipping dimensions:
Shipping weight:
66x48x30 cm
30 Kg

Photo Impression